This booster pump is designed as an addition for Reverse Osmosis Units in areas with water pressure less than 40 PSI. It is quiet and can significantly increase water output by increasing the water pressure (PSI) for your reverse osmosis system and maintaining the pressure at ideal levels for the system to operate at maximum efficiency.

This set is included Booster Pump & Transformer only.

High pressure switch for reverse osmosis booster pump (on – off) operation control (not included in set) is required to operate you RO system automatically. High pressure switch job is to turn off the booster pump when the tank is full.

Product Features:

-100 GPD booster pump is designed for membranes rated 100 GPD.
-Pressure – 125 PSI
-Adapter: Input: 110V/220V; Output: DC24V; Frequency: 50/60Hz
-Boost incoming pressure to enhanced production and increased purity
-Standard 110v Plug
-Mounting Bracket with rubber absorbers
-Inlet/Outlet Threads for 3/8″ Fittings
Technical Parameters:

-Voltage: 24V
-Current:950ML/M

-REVERSE OSMOSIS 100 GPD Diaphragm Booster Pump
-INCREASES YOUR MEMBRANE PERFORMANCE if your municipality water pressure (PSI) rated low
-SAFE POWER OPERATION WITH, LOW ENERGY (low voltage – 24 volt). Transformer included.
-DUTY CYCLE MOTOR of these boosters will vary with load and ambient temperature; smoother running; longer life; and work with high efficienciesEASY INSTALLATION, RELIABLE PRODUCT: can be mounted in several positions; never mind if its installed in warm, humid, hostile environment where other pumps cant operate in such hard environments.